Shark Self Cleaning Brushroll Cordless Vacuum Manual

The Shark Self Cleaning Brushroll Cordless Vacuum is designed for efficient cleaning with its innovative self-cleaning brushroll technology. This cordless vacuum offers powerful suction, a lightweight design, and versatile cleaning capabilities for carpets, hard floors, and above-floor surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Self-cleaning brushroll, cordless design, LED headlights, and a removable battery for extended cleaning time.

Feature	Description
Self-Cleaning Brushroll	Automatically removes hair and debris from the brushroll.
Cordless Design	Freedom to clean without being tethered to a power outlet.
LED Headlights	Illuminates hidden debris and pet hair.
Removable Battery	Allows for easy charging and replacement.
Lightweight	Easy to maneuver and carry around the house.
Multi-Surface Cleaning	Effective on carpets, hard floors, and upholstery.

Installation

Unbox the vacuum and ensure all components are included. Charge the battery fully before first use.

Attach the handle to the vacuum body until it clicks into place.
Insert the battery into the vacuum until it locks securely.
Charge the vacuum for at least 4 hours before first use.
Ensure the brushroll is free of debris before operating.

WARNING! Do not use the vacuum while charging. Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum; follow the prompts on the display.

Press the power button to turn on the vacuum.
Select the cleaning mode: carpet or hard floor.
Adjust the suction power if necessary.
Begin cleaning by guiding the vacuum over the desired area.

CAUTION! Ensure the area is free of large objects before vacuuming.

Specifications

Battery Type: Lithium-ion.
Run Time: Up to 40 minutes on a full charge.
Weight: 7.5 lbs.
Charging Time: Approximately 4 hours.
Filtration: Washable HEPA filter.
Noise Level: 75 dB.
Warranty: 5 years limited warranty.

Controls and Settings

Access settings via the control panel on the vacuum. Features include power, suction adjustment, and mode selection.

Remote: Not applicable; all controls are located on the vacuum.

Cleaning modes: Carpet, Hard Floor, and Spot Clean. Adjust suction for different surfaces as needed.

Connecting Accessories

Compatible with various Shark accessories for enhanced cleaning.

Turn off the vacuum before attaching accessories.
Align the accessory with the connector and push until it clicks.
Select the appropriate mode for the accessory being used.

Tip: Use the pet tool for effective pet hair removal.

Operating the Vacuum

Follow these steps for optimal operation:

Power on the vacuum and select the desired cleaning mode.
Guide the vacuum slowly over the surface for thorough cleaning.
Use the self-cleaning feature regularly to maintain brushroll performance.
Empty the dust cup as needed to maintain suction power.

WARNING! Do not use on wet surfaces or with wet debris.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the brushroll regularly to prevent hair buildup.
Wash the HEPA filter every 3 months.
Check for blockages in the hose and attachments.
Store the vacuum in a dry place.

CAUTION! Always unplug before performing maintenance.

Regulatory Information

This vacuum complies with FCC regulations and safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged	Charge the battery for at least 4 hours.
No suction	Clogged filter or dust cup	Clean or replace the filter; empty the dust cup.
Brushroll not spinning	Blocked brushroll	Remove debris from the brushroll.
Battery not holding charge	Old battery	Replace the battery if it no longer holds a charge.

Reset: Power off and on to reset the vacuum.

Service: 1-800-798-7398; www.sharkclean.com