Shark RV2001 Vacuum Manual

The Shark RV2001 is a robotic vacuum designed for efficient cleaning with advanced navigation technology. It features a powerful suction system, smart sensors to avoid obstacles, and a self-cleaning brush roll. The vacuum is equipped with a rechargeable battery, allowing for extended cleaning sessions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, self-cleaning brush roll, and a compact design for easy storage.

FeatureDescription
Smart NavigationUses advanced sensors to navigate around furniture and avoid obstacles.
Powerful SuctionDesigned to pick up dirt, dust, and pet hair from various surfaces.
Self-Cleaning Brush RollPrevents hair wrap and maintains optimal cleaning performance.
Rechargeable BatteryProvides up to 90 minutes of cleaning time on a single charge.
Compact DesignEasy to store and maneuver in tight spaces.

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

  1. Connect the charging dock to a power outlet.
  2. Ensure the area is free of obstacles for optimal navigation.
  3. Place the vacuum on the dock to charge before first use.

WARNING! Ensure the vacuum is turned off while setting up the charging dock.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

  1. Download the Shark app and create an account.
  2. Connect the vacuum to your home Wi-Fi network.
  3. Set cleaning schedules and preferences through the app.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Controls and Settings

Access settings via the Shark app or the physical buttons on the vacuum.

Remote: Start/Stop, Dock, and Cleaning Mode selection.

Settings include scheduling, cleaning modes, and battery status.

Connecting to Wi-Fi

Ensure your Wi-Fi network is active and within range.

  1. Open the Shark app and select "Add Device."
  2. Follow the prompts to connect the vacuum to your Wi-Fi.
  3. Confirm the connection through the app.

Tip: Keep your router away from obstructions for better connectivity.

Cleaning Modes

Choose from various cleaning modes based on your needs.

  1. Auto Mode: For general cleaning.
  2. Spot Mode: For concentrated cleaning in a specific area.
  3. Edge Mode: For cleaning along walls and corners.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance

Regular maintenance ensures optimal performance.

  1. Empty the dust bin after each use.
  2. Clean the brush roll regularly to prevent hair buildup.
  3. Check and replace filters as needed.

CAUTION! Always turn off the vacuum before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum does not startBattery deadCharge the vacuum for at least 3 hours.
No suctionClogged filterCheck and clean the filter.
Navigation issuesObstacles in the wayClear the area of obstacles.
App connection issuesWi-Fi signal weakMove the router closer to the vacuum.
Brush roll not spinningHair entangledRemove hair from the brush roll.

Reset: Use the app to reset the vacuum if needed.

Service: For support, visit www.sharkclean.com or contact customer service.

Shark RV2001 Vacuum Manual © - All Rights Reserved 2026