Shark Rotator NV652 Powered Lift-Away Vacuum Manual

The Shark Rotator NV652 is a versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a powered lift-away design, allowing you to detach the canister for portable cleaning. With advanced swivel steering, a HEPA filter, and a variety of attachments, this vacuum is perfect for tackling pet hair, dust, and allergens. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Powered lift-away canister, HEPA filter, pet power brush, dusting brush, crevice tool, and a large capacity dust cup.

Feature	Description
Powered Lift-Away	Detach the canister for portable cleaning.
HEPA Filter	Captures allergens and dust particles.
Swivel Steering	Easy maneuverability around furniture.
Large Dust Cup	Holds more dirt for less frequent emptying.
Pet Power Brush	Designed for removing pet hair from carpets and upholstery.

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the main body until it clicks into place.
Connect the desired cleaning accessory to the hose.
Plug into a power outlet.

WARNING! Ensure vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check that the dust cup is properly installed.
Ensure the filter is clean and correctly placed.
Adjust the height setting for different floor types.

CAUTION! Do not operate without a filter; it may damage the vacuum.

Specifications

Model: Shark Rotator NV652.
Type: Upright vacuum with lift-away feature.
Filtration: HEPA filter.
Weight: Approximately 13.7 lbs.
Power: 120V AC.
Cord Length: 30 feet.
Dust Cup Capacity: 0.9 quarts.

Controls and Settings

Access the controls on the handle for power, suction settings, and brush roll activation.

Remote: Power button, suction control, and brush roll on/off.

Adjust settings based on the surface being cleaned for optimal performance.

Connecting Accessories

Attach accessories by firmly pushing them onto the hose or wand.

Ensure vacuum is off before changing attachments.
Match the accessory to the intended cleaning task.

Tip: Use the pet power brush for effective pet hair removal.

Using the Vacuum

To operate, press the power button and select the desired suction setting.

Use the lift-away feature for cleaning above-floor areas.
Adjust the height setting for carpets or hard floors.
Empty the dust cup when full.

WARNING! Do not use on wet surfaces.

Maintenance and Care

Regularly clean the filters and empty the dust cup for optimal performance.

CAUTION! Unplug before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust cup	Clear clogs and empty dust cup.
Brush roll not spinning	Brush roll setting off	Turn on brush roll setting.
Filter needs cleaning	Dirty filter	Wash filter according to instructions.

Reset: Refer to the manual for reset instructions if necessary.

Service: For assistance, contact customer support at 1-800-798-7398.