Shark Rocket DuoClean Vacuum Manual

The Shark Rocket DuoClean is a versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a DuoClean technology with two brush rolls that work together to remove large debris, small particles, and stuck-on dust from carpets and floors. The vacuum is lightweight, easy to maneuver, and comes with various attachments for above-floor cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean technology, lightweight design, detachable hand vacuum, various cleaning attachments, and washable filters.

Feature	Description
DuoClean Technology	Two brush rolls for deep cleaning carpets and hard floors.
Lightweight Design	Easy to carry and maneuver around the house.
Detachable Hand Vacuum	For above-floor cleaning and quick pickups.
Washable Filters	Reusable filters that can be easily cleaned.
LED Lights	Illuminates hidden debris in dark areas.

Installation

Unpack the vacuum and inspect all components. Assemble the vacuum as per the instructions provided in the manual.

Attach the handle to the main body until it clicks into place.
Connect any desired cleaning attachments.
Ensure the dust cup is properly installed.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the dust cup and filters are clean and properly installed.
Adjust the height setting according to your flooring type.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not use the vacuum on wet surfaces.

Specifications

Model: Shark Rocket DuoClean.
Weight: Approximately 8 lbs.
Power: 120V AC.
Filtration: Washable foam and felt filters.
Cleaning Path Width: 10.5 inches.
Cord Length: 30 feet.
Accessories: Crevice tool, dusting brush, and pet multi-tool.

Controls and Settings

Access the power button and suction settings on the handle. Use the foot pedal to switch between carpet and hard floor modes.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the attachment with the connector and push until it clicks.
To remove, press the release button and pull the attachment off.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

To start, press the power button and select the appropriate suction setting.

Move the vacuum forward and backward to clean the area.
Use the detachable hand vacuum for above-floor cleaning.
Empty the dust cup when full.

WARNING! Do not block the vacuum's air intake.

Maintenance and Care

Regularly clean the filters and empty the dust cup to maintain performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power outlet and cord connections.
No suction	Clogged hose or full dust cup	Inspect for clogs and empty the dust cup.
Brush roll not spinning	Blocked brush roll	Remove any debris and clean the brush roll.
Strange noise	Foreign object in vacuum	Turn off and inspect for obstructions.

Reset: Unplug for 30 seconds to reset the vacuum.

Service: For assistance, contact customer service at 1-800-798-7398.