Shark NV800 Vacuum Manual

The Shark NV800 is a powerful upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features advanced technology for effective suction, a detachable canister for portable cleaning, and various attachments for versatile cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Powerful suction, detachable canister, HEPA filtration, various cleaning attachments, and LED headlights.

Feature	Description
Detachable Canister	For portable cleaning of stairs and above-floor areas
HEPA Filtration	Captures allergens and dust for cleaner air
LED Headlights	Illuminates dark areas for better visibility
Multi-Surface Cleaning	Effective on carpets, hardwood, and tiles
Various Attachments	Includes crevice tool, dusting brush, and pet power brush

Installation

Unpack and inspect contents. Assemble the vacuum according to the instructions.

Attach the handle to the main body until it clicks into place.
Connect the hose to the canister.
Attach desired cleaning tool to the hose.
Plug into a power outlet.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting for different floor types.
Test the suction power on various surfaces.
Practice using the attachments for different cleaning tasks.

CAUTION! Do not use on wet surfaces; ensure the vacuum is dry before use.

Specifications

Model: Shark NV800.
Type: Upright vacuum cleaner.
Filtration: HEPA filter.
Power: 120V AC.
Weight: 13.5 lbs.
Cord Length: 30 feet.
Attachments: Crevice tool, dusting brush, pet power brush.
Warranty: 5 years limited.

Controls and Settings

Access controls on the handle for power and suction settings. Use the foot pedal to switch between carpet and hard floor modes.

Attachments: Easily switch attachments by pressing the release button.

Connecting Accessories

Ensure the vacuum is off before connecting accessories.

Align the attachment with the hose and push until it clicks.
To remove, press the release button and pull the attachment off.

Tip: Store attachments in a designated area for easy access.

Using the Vacuum

For optimal performance, regularly empty the dust cup and clean the filters.

Turn on the vacuum using the power button.
Adjust the height setting based on the floor type.
Use slow, steady strokes for effective cleaning.

WARNING! Do not block the suction inlet; check for clogs regularly.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Empty the dust cup after each use.
Wash the filters every 3 months.
Inspect the brush roll for hair and debris.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power connection and outlet.
No suction	Clogged hose or full dust cup	Inspect for clogs and empty the dust cup.
Brush roll not spinning	Blocked brush roll	Remove debris and ensure the brush roll is free to spin.
Strange noise	Foreign object in vacuum	Turn off and inspect for any obstructions.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact customer support.