Shark NV370 Vacuum Manual

The Shark NV370 is a powerful upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a lightweight design, advanced swivel steering, and a detachable canister for portable cleaning. The vacuum includes a HEPA filter to trap allergens and dust, making it ideal for allergy sufferers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Powerful motor, HEPA filter, detachable canister, advanced swivel steering, and multiple cleaning attachments.

Feature	Description
HEPA filter	Traps allergens and dust particles
Swivel steering	Enhances maneuverability around furniture
Detachable canister	Allows for portable cleaning
Brush roll	Deep cleans carpets and hard floors
LED lights	Illuminates dark areas for better visibility

Installation

Unpack and inspect contents. Assemble the vacuum according to the instructions provided.

Attach the handle to the main body until it clicks into place.
Connect the hose to the canister.
Ensure all attachments are securely attached.
Plug into a power outlet.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and settings.

Adjust the height setting for different floor types.
Test the suction power using the power button.
Attach desired cleaning accessories for specific tasks.

CAUTION! Ensure the vacuum is on a stable surface during operation.

Specifications

Model: Shark NV370.
Type: Upright vacuum cleaner.
Weight: 13.5 lbs.
Power: 120V AC.
Filtration: HEPA filter.
Attachments: Crevice tool, dusting brush, pet power brush.
Cord Length: 30 feet.
Warranty: 5 years limited.

Controls and Settings

Access controls via the main power switch and height adjustment dial. The vacuum features a suction control button for different surfaces.

Remote: Not applicable; controls are located on the vacuum body.

Connecting Accessories

Use the provided attachments for various cleaning tasks.

Turn off the vacuum before changing attachments.
Align the attachment with the hose and push until it clicks.
Ensure the attachment is secure before use.

Tip: Use the pet power brush for effective pet hair removal.

Using the Vacuum

Follow these steps for optimal cleaning performance.

Power on the vacuum using the main switch.
Adjust the height setting based on the floor type.
Move the vacuum back and forth to clean the area.
Use the hose and attachments for corners and edges.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dust cup after each use.
Clean the HEPA filter every 6 months.
Check for blockages in the hose and brush roll.

CAUTION! Ensure vacuum is unplugged before performing maintenance.

Care & Cleaning

Unplug before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Avoid getting water inside the vacuum.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose	Inspect and clear any blockages.
Brush roll not spinning	Brush roll jammed	Remove debris and reset the brush roll.
Filter needs cleaning	Reduced airflow	Clean or replace the HEPA filter as needed.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact customer service at 1-800-798-7398 or visit www.sharkclean.com.