Shark NV358 Vacuum Manual

The Shark NV358 is a versatile vacuum cleaner designed for powerful suction and efficient cleaning on various surfaces. It features a lightweight design, advanced swivel steering, and a detachable canister for portable cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, advanced swivel steering, detachable canister, HEPA filtration, and multiple cleaning attachments.

Feature	Description
Swivel Steering	Allows for easy maneuverability around furniture
Detachable Canister	Enables portable cleaning for stairs and above-floor areas
HEPA Filtration	Captures allergens and dust for cleaner air
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery tool
Large Dust Cup	Holds more dirt and debris for less frequent emptying

Installation

Unpack the vacuum and inspect all components. Assemble according to the instructions.

Attach the handle to the main body until it clicks into place.
Connect the desired cleaning attachment to the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting based on your floor type.
Test the suction power using the different attachments.
Read the user manual for detailed instructions on features.

CAUTION! Do not use on wet surfaces; ensure the vacuum is dry before use.

Specifications

Model: Shark NV358.
Power: 1200 watts.
Filtration: HEPA filter.
Weight: 8.5 lbs.
Cord Length: 30 feet.
Dust Cup Capacity: 1.2 quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.

Controls and Settings

Access settings via the control panel on the handle. Features include power switch, height adjustment, and suction control.

Remote: Not applicable for this model; all controls are manual.

Connecting Accessories

To connect accessories, simply slide the desired tool onto the hose until it clicks into place.

Ensure the vacuum is powered off before changing attachments.
Match the attachment to the hose securely.

Tip: Use the appropriate attachment for the surface being cleaned for optimal results.

Operating the Vacuum

To operate the vacuum, press the power button and adjust the height setting as needed.

Begin cleaning by moving the vacuum back and forth across the surface.
Use the attachments for corners and edges.
Empty the dust cup when full for optimal performance.

WARNING! Do not block the suction inlet during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filters monthly and replace them as needed.
Empty the dust cup after each use.
Check for blockages in the hose and attachments.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose	Inspect and clear any blockages.
Dust escaping	Full dust cup	Empty the dust cup and clean filters.
Strange noise	Foreign object in brush roll	Turn off and remove any obstructions.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: 1-800-798-7398; www.sharkclean.com