Shark NV353 Vacuum Manual

The Shark NV353 is a powerful upright vacuum cleaner designed for versatile cleaning on carpets and hard floors. It features a lightweight design, advanced swivel steering, and a detachable canister for portable cleaning. The vacuum includes a HEPA filter to trap allergens and dust, making it ideal for allergy sufferers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum design, detachable canister, HEPA filter, advanced swivel steering, and various cleaning attachments.

Feature	Description
Detachable Canister	For portable cleaning of stairs and above-floor areas
HEPA Filter	Traps allergens and dust for cleaner air
Swivel Steering	Manoeuvres easily around furniture
Brush Roll	Deep cleans carpets and picks up pet hair
LED Headlights	Illuminates dark areas for better visibility
Cleaning Attachments	Includes crevice tool, dusting brush, and upholstery tool

Installation

Unpack the vacuum and inspect all components. Assemble the handle and attach the hose as per the instructions.

Attach the handle to the vacuum base until it clicks into place.
Connect the hose to the vacuum body.
Ensure all attachments are securely fitted.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting for different floor types.
Test the suction power using the control dial.
Attach the desired cleaning tool for specific tasks.

CAUTION! Do not operate the vacuum without the dust cup or filter in place.

Specifications

Model: Shark NV353.
Type: Upright vacuum cleaner.
Weight: 13.7 lbs.
Power: 1200 watts.
Filtration: HEPA filter.
Cord Length: 25 feet.
Cleaning Path Width: 10.5 inches.
Accessories: Crevice tool, dusting brush, upholstery tool.

Controls and Settings

Access the vacuum controls on the handle for power, suction adjustment, and brush roll activation.

Controls: Power button, suction control dial, and brush roll switch.

Settings: Adjust height for different floor types and select attachments for specific cleaning tasks.

Connecting Accessories

Attach accessories by firmly pushing them onto the hose or wand until they click into place.

Ensure the vacuum is powered off before changing attachments.
Match the accessory to the appropriate port.
Test the connection by gently pulling on the accessory.

Tip: Use the right attachment for optimal cleaning results.

Operating the Vacuum

To operate the vacuum, plug it in and press the power button. Adjust the suction as needed.

Start cleaning by pushing the vacuum forward and pulling it back.
Use the attachments for corners and edges.
Empty the dust cup when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filters and check for blockages.

Wash the HEPA filter every 6 months.
Empty the dust cup after each use.
Inspect the brush roll for hair and debris.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust cup	Clear blockages and empty dust cup.
Brush roll not spinning	Brush roll switch off	Turn on the brush roll switch.
Filter needs cleaning	Dirty filter	Wash or replace the filter as needed.

Reset: Unplug for 30 seconds and plug back in if issues persist.

Service: For assistance, contact customer service at 1-800-798-7398.