Shark NV22LWM Vacuum Manual

The Shark NV22LWM is a powerful upright vacuum designed for versatile cleaning on carpets and hard floors. It features a lightweight design, advanced swivel steering, and a detachable canister for portable cleaning. The vacuum includes a HEPA filter to trap allergens and dust, making it ideal for allergy sufferers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filter, detachable canister, advanced swivel steering, and multiple cleaning attachments.

Feature	Description
HEPA Filter	Traps allergens and dust for cleaner air
Swivel Steering	Easy maneuverability around furniture
Detachable Canister	Portable cleaning for above-floor areas
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery tool
Large Dust Cup	Holds more dirt and debris for less frequent emptying

Installation

Unpack and inspect contents. Assemble the vacuum by attaching the handle to the base.

Attach the hose to the vacuum body until it clicks.
Connect the desired cleaning attachment to the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and features.

Check the dust cup: Ensure it is empty before use.
Adjust the height setting for different floor types.
Test the vacuum on a small area to ensure proper function.

CAUTION! Do not use on wet surfaces.

Specifications

Model: Shark NV22LWM.
Type: Upright vacuum cleaner.
Weight: 10 lbs.
Power: 120V AC.
Filtration: HEPA filter.
Dust Cup Capacity: 1.2 quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 5 years limited.

Controls and Settings

Access controls on the handle for power and height adjustment. The dust cup release button is located on the side of the vacuum.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Attach accessories by firmly pushing them onto the hose or wand until they click into place.

Ensure the vacuum is powered off before changing attachments.
Match the attachment to the intended cleaning task.

Tip: Store attachments in a designated area for easy access.

Using the Vacuum

To operate, press the power button and begin cleaning. Adjust the height setting as needed for different surfaces.

Start cleaning from one corner of the room and move systematically.
Empty the dust cup when full for optimal performance.
Use the attachments for edges and upholstery.

WARNING! Do not vacuum liquids or large debris.

Maintenance and Care

Regularly clean the filters and empty the dust cup to maintain performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust cup	Inspect hose for clogs and empty dust cup.
Brush roll not spinning	Height setting too low	Adjust height setting for carpet or floor.
Strange noise	Foreign object in brush roll	Turn off and remove any obstructions.

Reset: Unplug for 10 seconds and plug back in.

Service: For assistance, contact customer service at 1-800-798-7398.