Shark NV22 Vacuum Manual

The Shark NV22 is a powerful upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a lightweight design, advanced swivel steering, and a detachable canister for portable cleaning. The vacuum includes a HEPA filter to trap allergens and dust, making it ideal for allergy sufferers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filter, detachable canister, advanced swivel steering, and multiple cleaning attachments.

Feature	Description
HEPA filter	Traps allergens and dust for cleaner air
Swivel steering	Allows for easy maneuverability around furniture
Detachable canister	For portable cleaning of stairs and above-floor areas
Brush roll	Deep cleans carpets and removes pet hair
LED headlights	Illuminates dark areas for better visibility

Installation

Unpack and inspect contents. Assemble the vacuum according to the instructions provided.

Attach the handle to the body of the vacuum.
Connect the hose and desired cleaning attachment.
Ensure the dust canister is securely in place.
Plug into a power outlet.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and features.

Check that the dust canister is empty and properly attached.
Adjust the height setting for carpet or hard floor cleaning.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum without the dust canister in place.

Specifications

Model: Shark NV22
Type: Upright vacuum cleaner
Weight: 10 lbs
Power: 120V AC
Filtration: HEPA filter
Cleaning Path Width: 10 inches
Attachments: Crevice tool, dusting brush, pet power brush
Warranty: 5 years limited

Controls and Settings

Access controls on the handle for power and height adjustment. The vacuum features a simple on/off switch and a height adjustment dial for different floor types.

Connecting Accessories

Use the provided attachments for various cleaning tasks. Ensure the vacuum is off before changing accessories.

Detach the hose from the vacuum.
Attach the desired accessory securely.
Reattach the hose if necessary.

Tip: Store accessories in a designated area for easy access.

Using the Vacuum

Start cleaning by powering on the vacuum and selecting the appropriate height setting.

Push the vacuum forward to clean.
Pull back to vacuum in reverse.
Use the hose and attachments for corners and edges.

WARNING! Do not vacuum wet surfaces or large debris.

Maintenance and Care

Regularly empty the dust canister and clean the filters to maintain performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Clogged hose or full canister	Empty canister and check for blockages.
Brush roll not spinning	Height setting or blockage	Adjust height or clear any debris.
Strange noise	Foreign object in vacuum	Turn off and check for obstructions.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact customer service at 1-800-798-7398.