Shark Navigator Vacuum Manual

The Shark Navigator is a versatile vacuum cleaner designed for efficient cleaning on various surfaces. It features a lightweight design, powerful suction, and advanced filtration technology to capture dust and allergens. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, detachable canister, and various cleaning attachments.

Feature	Description
Lightweight Design	Easy to maneuver and carry around the house.
HEPA Filtration	Captures 99.9% of dust and allergens.
Detachable Canister	For easy cleaning of above-floor areas.
Various Attachments	Includes crevice tool, dusting brush, and upholstery tool.
Powerful Suction	Efficiently picks up dirt and debris from carpets and hard floors.

Installation

Unpack the vacuum and inspect all components. Assemble the vacuum according to the instructions provided.

Attach the handle to the main body of the vacuum.
Connect the desired cleaning attachment.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the dust canister: Ensure it is empty and properly attached.
Select the appropriate cleaning mode based on the surface.
Adjust the height setting if applicable.

CAUTION! Always read the user manual before operating the vacuum.

Specifications

Model: Shark Navigator NV352.
Weight: 13.7 lbs.
Filtration: HEPA filter and foam filter.
Power: 120V, 60Hz.
Cord Length: 25 feet.
Cleaning Path Width: 9.25 inches.
Capacity: 2.2 quarts.

Controls and Settings

Access the power button and suction control on the handle. Use the foot pedal to switch between modes.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Attach accessories by firmly pushing them into the vacuum's hose or wand.

Ensure the vacuum is turned off before changing attachments.
Align the attachment with the connection point and push until it clicks.

Tip: Use the right attachment for optimal cleaning results.

Operating the Vacuum

To start cleaning, press the power button and select the desired suction level.

Move the vacuum forward and backward to clean the area.
Use the hose and attachments for corners and above-floor cleaning.
Empty the dust canister when full.

WARNING! Do not operate the vacuum without the dust canister in place.

Maintenance and Care

Regularly clean the filters and empty the dust canister for optimal performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit the Shark website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source issue	Check the power outlet and cord.
No suction	Clogged hose or full canister	Inspect for clogs and empty the canister.
Brush roll not spinning	Blocked or damaged brush	Clear any debris and check for damage.
Excessive noise	Loose parts or clogs	Inspect for loose components and clear clogs.

Reset: Refer to the user manual for reset instructions if available.

Service: Contact Shark customer service for further assistance.