Shark Navigator Swivel Pro Vacuum Manual

The Shark Navigator Swivel Pro is a versatile vacuum cleaner designed for effective cleaning on various surfaces. It features a lightweight design, advanced swivel steering for easy maneuverability, and a powerful suction system. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Maintenance and Care 7. Troubleshooting

Features at a Glance

Key features include: lightweight design, advanced swivel steering, HEPA filtration, and a detachable canister for portable cleaning.

Feature	Description
Swivel Steering	Allows for easy maneuverability around furniture.
HEPA Filter	Captures allergens and dust for cleaner air.
Detachable Canister	Enables portable cleaning for stairs and above-floor areas.
Brush Roll	Deep cleans carpets and picks up pet hair.
Dust Cup	Easy to empty and clean.

Assembly Instructions

Unpack the vacuum and ensure all parts are included. Follow these steps to assemble:

Attach the handle to the main body until it clicks into place.
Connect the hose to the canister.
Insert the desired cleaning tool into the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly.

First-Time Use

Before using the vacuum for the first time, ensure it is fully assembled and plugged in. Follow these steps:

Turn on the vacuum using the power switch.
Select the appropriate cleaning mode using the control settings.
Begin vacuuming by moving the unit forward and backward.

CAUTION! Do not use on wet surfaces.

Specifications

Model: Shark Navigator Swivel Pro.
Weight: 13.7 lbs.
Power: 120V, 60Hz.
Filtration: HEPA filter.
Dust Cup Capacity: 1.2 quarts.
Cord Length: 30 feet.
Cleaning Path Width: 10.5 inches.

Controls and Settings

The vacuum features an easy-to-use control panel located on the handle. Key controls include:

Power Button: Turns the vacuum on and off.
Mode Selector: Switches between carpet and hard floor modes.
Brush Roll Control: Activates or deactivates the brush roll.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these guidelines:

Empty the dust cup after each use.
Clean the HEPA filter every 6 months.
Check for blockages in the hose and brush roll.
Store in a dry place.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose	Inspect and clear any blockages.
Brush roll not spinning	Brush roll control	Ensure brush roll is activated.
Filter needs cleaning	Dirty filter	Clean or replace the HEPA filter.

Service: For further assistance, contact customer support.