Shark Navigator NV352 Lift-Away Vacuum Manual

The Shark Navigator NV352 Lift-Away is a versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a lightweight design, a detachable canister for portable cleaning, and a powerful suction that captures pet hair and allergens. The vacuum includes a variety of attachments for different cleaning tasks, making it ideal for homes with pets and allergies. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lift-Away canister, HEPA filter, pet power brush, crevice tool, dusting brush.

Feature	Description
Lift-Away Technology	Detachable canister for portable cleaning
HEPA Filter	Traps 99.9% of dust and allergens
Pet Power Brush	Specialized tool for removing pet hair
Crevice Tool	For tight spaces and corners
Dusting Brush	For delicate surfaces
Large Capacity Dust Cup	Holds more dirt and debris
Swivel Steering	Easy maneuverability around furniture
Powerful Suction	Deep cleans carpets and hard floors

Installation

Unpack the vacuum and inspect all components. Assemble the vacuum by attaching the handle and the desired cleaning tool.

Attach the handle to the main body until it clicks into place.
Connect the desired cleaning tool to the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Press the power button to turn on the vacuum.
Select the desired cleaning mode using the mode selector.
Adjust the suction power if necessary.

CAUTION! Always check for obstructions before use.

Specifications

Model: Shark Navigator NV352 Lift-Away.
Weight: 13.7 lbs.
Power: 1200 watts.
Filtration: HEPA filter and foam filter.
Dust Cup Capacity: 1.2 quarts.
Cord Length: 25 feet.
Cleaning Path Width: 9.25 inches.
Warranty: 5 years.

Controls and Settings

Access the vacuum controls on the handle and body. The main controls include the power button, suction control, and mode selector.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting accessories.

Align the accessory with the hose or wand.
Push until it clicks into place.
To remove, press the release button and pull off the accessory.

Tip: Use the appropriate attachment for the surface being cleaned.

Using the Vacuum

For optimal performance, follow these steps:

Turn on the vacuum and select the cleaning mode.
Guide the vacuum slowly over the surface for thorough cleaning.
Use the Lift-Away feature for above-floor cleaning.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty the dust cup after each use.
Clean the filters monthly; replace as needed.
Check for clogs in the hose and attachments.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power cord and outlet.
No suction	Clogged hose or full dust cup	Clear any clogs and empty the dust cup.
Brush roll not spinning	Brush roll jammed	Remove debris from the brush roll.
Filter needs cleaning	Filter is dirty	Clean or replace the filter as needed.

Service: For assistance, contact customer support at 1-800-798-7398 or visit the website.