Shark Navigator Lift-Away NV360 Vacuum Manual

The Shark Navigator Lift-Away NV360 is a versatile vacuum cleaner designed for powerful suction and ease of use. It features a detachable canister for portable cleaning, a lightweight design, and advanced swivel steering for maneuverability. The vacuum is equipped with a HEPA filter to trap allergens and a dust cup that is easy to empty. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lift-Away canister, HEPA filter, washable foam filter, dust cup, and various attachments for different cleaning tasks.

Feature	Description
Lift-Away Canister	Detachable canister for portable cleaning
HEPA Filter	Traps allergens and dust particles
Swivel Steering	Easy maneuverability around furniture
Dust Cup	Easy to empty and clean
Attachments	Includes crevice tool, dusting brush, and pet power brush

Installation

Unpack and inspect contents. Assemble the vacuum according to the instructions.

Attach the handle to the main body until it clicks into place.
Connect the desired cleaning attachment to the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the dust cup and filter are properly installed.
Adjust the height setting for different floor types.
Test the vacuum on a small area to ensure proper function.

CAUTION! Do not operate without the filters in place.

Specifications

Model: Shark Navigator Lift-Away NV360.
Weight: Approximately 13.7 lbs.
Power: 1200 watts.
Dust Cup Capacity: 0.9 quarts.
Filter Type: HEPA and foam filters.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, pet power brush.

Controls and Settings

Power button located on the handle. Height adjustment lever for different floor types.

Attachments: Easily switch between attachments by pressing the release button.

Connecting Accessories

Ensure the vacuum is powered off before connecting or disconnecting accessories.

Press the release button to detach the current accessory.
Align the new accessory with the hose and push until it clicks.

Tip: Use the appropriate attachment for optimal cleaning results.

Using the Vacuum

For optimal performance, regularly empty the dust cup and clean the filters.

Power on the vacuum and select the desired height setting.
Use the vacuum in a slow, steady motion for best results.
Empty the dust cup when it reaches the max fill line.

WARNING! Do not block the suction inlet while operating.

Maintenance and Care

Regularly check and clean the filters and dust cup.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and reset the circuit breaker.
No suction	Clogged hose or full dust cup	Check for clogs and empty the dust cup.
Brush roll not spinning	Blocked brush roll	Remove debris and reset the brush roll.
Filter needs cleaning	Dirty filter	Wash the filter according to instructions.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact customer service at 1-800-798-7398 or visit www.sharkclean.com.