Shark Navigator Lift-Away NV356E Vacuum Manual

The Shark Navigator Lift-Away NV356E is a versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a detachable canister for portable cleaning, a powerful suction system, and a range of attachments for various cleaning tasks. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup and Assembly 3. Operating Instructions 4. Specifications 5. Maintenance and Care 6. Troubleshooting 7. Customer Support

Features at a Glance

The Shark Navigator Lift-Away NV356E comes with several key features:

Lift-Away technology for portable cleaning.
Anti-Allergen Complete Seal Technology.
HEPA filter to trap allergens and dust.
Multiple attachments including a crevice tool and dusting brush.
Large capacity dust cup for less frequent emptying.

Setup and Assembly

Follow these steps to set up your Shark Navigator:

Unpack the vacuum and all accessories.
Attach the handle to the canister until it clicks into place.
Connect the desired cleaning attachment to the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly.

Operating Instructions

To operate your Shark Navigator:

Press the power button to turn on the vacuum.
Adjust the suction power using the control dial.
Use the appropriate attachment for the surface you are cleaning.
Empty the dust cup when full by pressing the release button.

CAUTION! Do not use on wet surfaces.

Specifications

Model: Shark Navigator Lift-Away NV356E.
Power: 1200 watts.
Weight: 13.7 lbs.
Dust Cup Capacity: 0.9 quarts.
Filter: HEPA filter.
Cord Length: 25 feet.

Maintenance and Care

To maintain your vacuum:

Regularly clean the filters and replace them as needed.
Check for blockages in the hose and brush roll.
Wipe the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power outlet and cord connections.
No suction	Clogged hose	Inspect and clear any blockages.
Brush roll not spinning	Brush roll jammed	Remove debris and reset the brush roll.

Reset: Unplug the vacuum for 30 seconds to reset.

Customer Support

For assistance, contact Shark customer support at 1-800-798-7398 or visit www.sharkclean.com.