Shark Ion Robot RV851 Vacuum Cleaner Manual

The Shark Ion Robot RV851 is a robotic vacuum cleaner designed to provide efficient cleaning with minimal effort. It features advanced navigation technology, powerful suction, and a self-cleaning brush roll. The vacuum is equipped with Wi-Fi connectivity, allowing users to control it via a mobile app or voice commands through smart home devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, self-cleaning brush roll, Wi-Fi connectivity, mobile app control.

Feature	Description
Smart Navigation	Maps your home for efficient cleaning paths
Powerful Suction	Deep cleans carpets and hard floors
Self-Cleaning Brush Roll	Prevents hair wrap for maintenance-free operation
Wi-Fi Connectivity	Control via mobile app or voice commands
Recharge and Resume	Automatically returns to charging dock when battery is low

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the area around the dock is free of obstacles.
Download the Shark Clean app and create an account.
Follow the app instructions to connect the vacuum to Wi-Fi.

WARNING! Ensure the charging dock is placed on a flat surface for optimal performance.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Charge the vacuum fully before first use.
Connect to Wi-Fi through the Shark Clean app.
Set cleaning schedules as desired.
Familiarize yourself with the app features.

CAUTION! Ensure the vacuum is on a stable surface during charging.

Specifications

Model: Shark Ion Robot RV851
Battery: Lithium-ion, 2600mAh
Run Time: Up to 90 minutes
Charging Time: Approximately 3 hours
Weight: 5.5 lbs
Dimensions: 12.6 x 12.6 x 3.5 inches
Dust Bin Capacity: 0.5 liters
Connectivity: Wi-Fi, compatible with Amazon Alexa and Google Assistant

Controls and Settings

Access controls via the Shark Clean app or the physical buttons on the vacuum.

App Controls: Start/stop cleaning, set schedules, view cleaning history.

Physical Controls: Power button, dock button, and spot clean button.

Connecting Devices

Connect the vacuum to your home Wi-Fi network through the Shark Clean app.

Ensure your smartphone is connected to the same Wi-Fi network.
Follow the app instructions to connect the vacuum.
Test the connection by starting a cleaning session from the app.

Tip: Keep the vacuum within range of the Wi-Fi signal for optimal performance.

Operating the Vacuum

To start cleaning, use the app or press the power button on the vacuum.

Choose a cleaning mode: Auto, Spot, or Edge.
Monitor the cleaning progress via the app.
Return the vacuum to the dock after cleaning is complete.

WARNING! Do not block the vacuum's sensors during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Empty the dust bin after each use.
Clean the brush roll and filters regularly.
Check for obstructions in the wheels and sensors.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This product complies with FCC regulations for residential use. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Power outlet issue	Check outlet; ensure dock is plugged in.
No suction	Clogged filter	Clean or replace the filter.
App not connecting	Wi-Fi issue	Check Wi-Fi signal; restart the vacuum and app.
Vacuum not cleaning	Battery low	Charge the vacuum fully before use.
Brush roll not spinning	Hair obstruction	Remove hair from the brush roll.

Reset: Use the app to reset the vacuum if necessary.

Service: 1-800-798-7398; www.sharkclean.com