Shark AZ3002 Vacuum Manual

The Shark AZ3002 is a versatile vacuum cleaner designed for powerful suction and efficient cleaning. It features a DuoClean technology that combines a bristle brush and a soft brush roll to effectively capture both large and small debris on carpets and hard floors. The vacuum is equipped with a HEPA filter to trap allergens and dust, making it ideal for homes with pets or allergy sufferers. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean technology, HEPA filter, Anti-Allergen Complete Seal, lightweight design, and versatile attachments.

Feature	Description
DuoClean Technology	Two brush rolls work together to clean carpets and hard floors.
HEPA Filter	Traps 99.9% of dust and allergens.
Anti-Allergen Complete Seal	Ensures that allergens are trapped inside the vacuum.
Lightweight Design	Easy to maneuver and carry.
Versatile Attachments	Includes tools for upholstery, crevices, and pet hair.

Installation

Unpack the vacuum and inspect all components. Attach the handle to the body until it clicks into place.

Connect the hose: Insert the hose into the designated port until it clicks.
Attach the desired cleaning head: Align and push until secure.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Adjust the height setting for carpets or hard floors.
Check the dust cup: Ensure it is empty and properly attached.
Test the suction power using the control settings.

CAUTION! Do not operate the vacuum without the dust cup in place.

Specifications

Model: Shark AZ3002.
Type: Upright vacuum cleaner.
Weight: 10.5 lbs.
Power: 1200 watts.
Filtration: HEPA filter with Anti-Allergen Complete Seal.
Cord Length: 30 feet.
Attachments: Crevice tool, upholstery tool, pet power brush.
Warranty: 5 years limited warranty.

Controls and Settings

Access the power switch and suction control on the handle. The vacuum features a height adjustment dial for different floor types.

Remote: Not applicable; controls are located on the vacuum body.

Connecting Accessories

Attach accessories by aligning them with the vacuum's hose or wand.

Turn off the vacuum before changing attachments.
Push the accessory until it clicks into place.

Tip: Use the appropriate tool for the surface being cleaned.

Operating the Vacuum

To operate, plug in the vacuum and press the power button. Adjust the suction as needed.

Start cleaning by pushing the vacuum forward.
Use the height adjustment for optimal performance on different surfaces.
Empty the dust cup when full.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regularly clean the filters and check for blockages in the hose.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.sharkclean.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power outlet and cord connections.
No suction	Clogged hose or full dust cup	Clear any blockages and empty the dust cup.
Brush roll not spinning	Height setting or blockage	Adjust height or remove any obstructions.
Excessive noise	Foreign object in brush roll	Inspect and remove any debris.

Reset: Unplug for 30 seconds to reset the vacuum.

Service: For assistance, contact customer service at 1-800-798-7398.