Shark AI Ultra 2 in 1 Robot Vacuum Manual

The Shark AI Ultra 2 in 1 Robot Vacuum is designed for efficient cleaning with advanced AI technology. It features a powerful suction system, self-cleaning brushroll, and smart mapping capabilities. This vacuum can transition seamlessly between vacuuming and mopping, making it ideal for various floor types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: AI navigation, dual cleaning modes, self-cleaning brushroll, smart mapping, and voice control compatibility.

Feature	Description
AI Navigation	Smart mapping for efficient cleaning paths
Dual Cleaning Modes	Vacuuming and mopping capabilities
Self-Cleaning Brushroll	Prevents hair wrap for hassle-free maintenance
Voice Control	Compatible with Alexa and Google Assistant
Recharge and Resume	Automatically returns to charging dock when low on battery

Installation

Unpack the vacuum and accessories. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the area around the dock is free of obstacles.
Charge the vacuum fully before first use.

WARNING! Keep the charging dock away from water and heat sources.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the SharkClean app and create an account.
Connect the vacuum to your Wi-Fi network.
Set cleaning schedules and preferences through the app.

CAUTION! Ensure the vacuum is fully charged before setup.

Specifications

Battery: Lithium-ion, 2600mAh.
Run Time: Up to 120 minutes.
Charging Time: Approximately 4 hours.
Weight: 7.5 lbs.
Dimensions: 12.5 x 12.5 x 3.5 inches.
Dust Bin Capacity: 0.6 liters.
Connectivity: Wi-Fi, compatible with Alexa and Google Assistant.

Controls and Settings

Access settings via the SharkClean app or the buttons on the vacuum.

Buttons: Power, Clean, Dock, Spot Clean.

Settings include scheduling, cleaning modes, and maintenance reminders.

Connecting to the App

Ensure the vacuum is powered on and within range of your Wi-Fi network.

Open the SharkClean app and log in.
Select "Add Device" and follow the prompts.
Confirm connection and customize settings.

Tip: Keep the app updated for the best performance.

Cleaning Modes

Select from various cleaning modes based on your needs.

Auto Mode: For general cleaning.
Spot Mode: For targeted cleaning in a specific area.
Edge Mode: For cleaning along walls and corners.

WARNING! Avoid using on wet surfaces to prevent damage.

Maintenance

Regular maintenance ensures optimal performance.

Empty the dust bin after each use.
Clean the brushroll and filters monthly.
Check for blockages in the wheels and sensors.

CAUTION! Always turn off the vacuum before maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum does not start	Battery drained	Charge the vacuum fully.
No suction	Clogged filter	Check and clean the filter.
App connection issues	Wi-Fi signal weak	Move the vacuum closer to the router.
Brushroll not spinning	Hair entangled	Remove hair from the brushroll.
Vacuum not returning to dock	Dock blocked	Ensure the dock is clear of obstacles.

Reset: Use the app to reset settings if needed.

Service: For support, visit www.sharkclean.com or contact customer service.